Issue 1.0 VM8000
2 - 196 Features
Direct Announcement Mailbox Routing
(If the outside caller routes directly to the Announcement Mailbox)
47-09-01 Next
Call
Routing
Mailbox
47-09-02
Repeat
Count
47-09-03
Hang Up
After
Action
Undefined 0 (No repeats)
0 = None
1 = Goodbye
2 = Silent
o If the caller doesn’t dial, after the
announcement VM8000 InMail hangs up.
o If the caller dials a digit during the
announcement, VM8000 InMail says
“That is an invalid entry” and hangs up.
1~32 (valid
Call Routing
Mailbox)
0 (No repeats)
0 = None
1 = Goodbye
2 = Silent
o If the caller doesn’t dial, after the
announcement they route to the Next Call
Routing Mailbox.
o If the caller dials a digit during the
announcement, they route to the Next
Call Routing Mailbox.
0 = None
1 = Goodbye
2 = Silent
o If the caller doesn’t dial, after the
announcement VM8000 InMail hangs up.
o If the caller dials a digit during the
announcement, they route to the Next
Call Routing Mailbox.
Undefined x (x number of
repeats)
0 = None
1 = Goodbye
2 = Silent
o If caller doesn’t dial, they hear the
announcement x number of times and
then VM8000 InMail hangs up.
o If the caller dials a digit during the
announcement, VM8000 InMail says
“That is an invalid entry” and aborts the
announcement. The announcement
repeats (if allowed by the Repeat Count)
and then VM8000 InMail hangs up.
1~32 (valid
Call Routing
Mailbox)
x (x number of
repeats)
0 = None
1 = Goodbye
2 = Silent
o If caller doesn’t dial, they hear the
announcement x number of times and
then route to the Next Call Routing
Mailbox.
o If the caller dials a digit during the
announcement, they route to the Next
Call Routing Mailbox.
0 = None
1 = Goodbye
2 = Silent
o If caller doesn’t dial, they hear the
announcement x number of times and
then VM8000 InMail hangs up.
o If the caller dials a digit during the
announcement, they route to the Next
Call Routing Mailbox.
To Next Page
Loading...
