NEC Univerge SV8100 VM8000 InMail - Page 295

VM8000 Issue 1.0
InMail System Guide 3 - 9
 41-19-02 Mailbox Number for 1st Announcement Message
Assign Voice Mail ACD Announcement Mailbox as the message source for
the 1st Announcement Message.
Options
Dial (Up to 7 digits)
Default
No Setting
 41-19-03 1st Delay Message Sending Count
Determine the 1st Delay Message Sending Count. This entry must be set to
1 or higher in order for the message to play.
Options
0 = No Message Played, 1~255
Default
0
 41-19-04 Mailbox Number for 2nd Announcement Message
Assign Voice Mail ACD Announcement Mailboxes as the message source
for the 2nd Announcement Message.
Options
Dial (Up to 7 digits)
Default
No Setting
 41-19-05 2nd Delay Message Sending Count
Determine the 2nd Delay Message Sending Count. This entry must be set
to 1 or higher in order for the message to play.
Options
0 = No Message Played, 1~255
Default
0
 41-19-06 Wait Tone Type at Message Interval
Determine what the caller will hear between the messages.
Options
0 = Ring Back Tone
1 = MOH Tone
2 = BGM Source
Default
0