NEC Univerge SV8100 VM8000 InMail - 47-01 VM8000 InMail System Options

Issue 1.0 VM8000
3 - 14 Programming
SECTION 6 PROGRAM 47 VM8000 INMAIL
47-01 VM8000 InMail System Options
Description
Use Program 47-01 VM8000 InMail System Options to set up the VM8000 InMail
system-wide options.
Options
 47-01-02 VM8000 InMail Master Name
Use this option to modify the name for all VM8000 InMail ports. The system
briefly displays this name when a display keyset user calls a Voice Mail
port, either by pressing Message, the voice mail key, or by dialing the
master number. You should always end the name with the ## characters.
The system substitutes the port number for the last #. Using the default
name VM8000 InMail ## for example, the keyset display shows VM8000
InMail #1 when calling port 1. Changing this program requires the CHS2U
GW-US be reset for the changes to take effect.
 See Keys for Entering Names on page 3-15.
Options
Consider leaving the option at its default setting.
Default
VM8000 InMail ## (The system substitutes the port number for the # when
calling the port).