Issue 1.0 VM8000
3 - 22 Programming
47-01 Program Entry
47-01 VM8000 InMail System Options Program Entry
(Entry Range) [Default Setting]
Speaker + #*#* + Password (12345678) + Transfer + 4701 + Option.
01 DSPDB VM Type (0=VM8000 InMail, 1=VRS) [0]
LK1=VM8000 InMail, LK2=VRS
02 VM8000 InMail Master Name (See Keys for Entering Names on page 3-15) [VM8000
InMail ##]
03 Subs Msg Length (1~4095) [120]
04 Mbox Msg Length (1~4095) [120]
05 Msg Bkup/Adv Time (1~60) [5]
06 Fax Extension (Extension number or no entry, entered by pressing Hold) [No entry]
07 Pager CBack (Digits, M=Number of messages, X=Extension number) [X*M#]
LK1=M, LK2=X
08 Pager Dial Delay (0~99) [9]
09 Notify Pager Intvl (1~255) [15]
10 Notify N-Pgr intvl (1~255) [20]
11 Notify Busy Intvl (1~255) [15]
12 Notify RNA Intvl (1~255) [30]
13 Notify RNA Rings (1~99) [5]
14 Notify Call Attmpt (1~99) [5]
15 Retry Until Ack (1=Yes - enabled, 0=No - disabled) [0]
16 Name Format (0=First-Last, 1=Last-First) [0]
Press this: To do this:
Editing
Transfer Enter (accept) data you entered and advance to the next prompt, or advance to the next
prompt without changing your entry.
-1 +1 Scroll backwards (-1) or forwards (+1) through the list of available entries.
When editing an entry, moves the cursor left or right.
Conf When editing an entry, delete the character to the left of the cursor.
Hold When editing an entry, Hold erases the entire entry from the display.
Line Keys (LK) Where indicated, press a line key to enter a specific value for the selected option.
Navigation
Answer Backs up to the previous level (e.g., from Option to Series, or from Series to Program).
Scroll consecutively backwards or forwards through selected Option or Series.
To Next Page
Loading...
