Issue 1.0 VM8000
3 - 38 Programming
Default
0 (No - disabled)
47-06-09 Auto Time Stamp
Use this option to enable or disable Auto Time Stamp for the Subscriber
Mailbox. If enabled, after the subscriber listens to a message VM8000
InMail announces the time and date the message was left. Auto Time
Stamp will also announce the message sender (if known).
A subscriber can also enable Auto Time Stamp from his mailbox.
See Auto Time Stamp for more.
See Routing Mailbox for more.
See Voice Mail Overflow for more.
Options
1 (Yes - enabled)
0 (No - disabled)
Default
0 (No - disabled)
47-06-10 System Administrator (System Admin)
Use this option to designate the Subscriber Mailbox as a System
Administrator. This allows the subscriber to use the SA options after logging
onto their mailbox.
See Routing Mailbox for more.
See System Administrator for more.
See Voice Mail Overflow for more.
Options
1 (Yes - enabled)
0 (No - disabled)
Default
0 (No - disabled)
47-06-11 Dialing Option
Dialing Option provides additional dialing options for Next Call Routing
Mailbox calls (see Next Call Routing Mailbox below). If enabled, a caller
who accesses the Subscriber Mailbox to leave a message can dial any of
the options in the Next Call Routing Mailbox’s Dial Action Table. If disabled,
the caller can only dial 0 (to use the Next Call Routing Mailbox’s 0 action).
See Routing Mailbox for more.
See Next Call Routing Mailbox.
See Voice Mail Overflow for more.
Options
1 (Yes - enabled)
0 (No - disabled)
Default
0 (No - disabled)
To Next Page
Loading...
