NEC Univerge SV8100 VM8000 InMail - Page 363

VM8000 Issue 1.0
InMail System Guide 3 - 77
47-13 Program Entry
47-13 VM8000 InMail Dial Action Tables
(Entry Range) [Default Setting]
When entering Keyxx Action data:
0=Undefined, 1=TRF, 2=UTRF, 3=REC1, 4=REC2, 5=LOGON, 6=Hangup, 7=GOTO
LK1=Undefined, LK2=TRF, LK3=UTRF, LK4=REC1, LK5=REC2, LK6=LOGON, LK7=Hangup
When entering Keyxx Data data:
8 digits max, using 0~9, #, *, X, I, N, P
LK1=N (No routing), LK2=X (Caller-dialed digits), LK3=I (Ignore Digits), LK4=P (Pause)
Default Settings below are for Dial Action Table 1. All actions for Dial Action Tables 2~16 are undefined.
Speaker + #*#* + Password (12345678) + Transfer + 4713 + Option.
There are 16 Dial Action Tables (1~16).
01 Key 01 Action [0-Undefined]
Key 01 Data [0]
02 Key 02 Action [0-Undefined]
Key 02 Data [0]
03 Key 03 Action [2 - UTRF]
Key 03 Data [XXXX]
04 Key 04 Action [0 -Undefined]
Key 04 Data [0]
05 Key 05 Action [0-Undefined]
Key 05 Data [0]
06 Key 06 Action [0-Undefined]
Key 06 Data [0]
07 Key 07 Action [0-Undefined]
Key 07 Data [0]
08 Key 08 Action [0-Undefined]
Key 08 Data [0]
09 Key 09 Action [6-Hangup]
Key 09 Data [0]
10
(0 key)
Key 10 Action [2 - UTRF]
Key 10 Data [101]
11
(* key)
Key 11 Action [3-REC1]
Key 11 Data [IXXX]
12
(# key)
Key 12 Action [5-LOGON]
Key 12 Data [IXXX]
13
(Timeout)
Key 13 Action [2 - UTRF]
Key 13 Data [101]