Issue 1.0 VM8000
2 - 58 Features
14-02-10 Analog Trunk Data Setup - Caller ID
Enable (1) a trunk ability to receive Caller ID data.
By default, a trunk’s ability to receive Caller ID data is disabled (0).
20-09-02 Class of Service Options (Incoming Call Service) - Caller ID Display
Enter 1 (Yes) to enable the Caller ID display at an extension.
This option does not apply to VM8000 InMail Voice Mail Ports.
By default, this option is disabled.
20-06-01 Class of Service for Extensions
Assign Class of Service to extensions.
By default, extension 101 has Class of Service 15. All other extensions have Class
of Service 1.
Operation
Not applicable.
To Next Page
Loading...
