R900 cellular endpoint Wall and Pit MIU Installation and Maintenance
23
Chapter 5: Pit Installation
This chapter describes storage and unpacking instructions, preliminary tests, tools,
materials, site selection, and pit installation of the R900 cellular endpoint.
Prior to Installation
Storage
Follow the procedures in this section before you install the R900 cellular endpoint.
Unpacking
After receiving the shipment, inspect the containers for damage and inspect the contents for
damage prior to storage.
After completing the inspection, store the cartons in a clean, dry environment. Keep in mind
that the R900 cellular endpoint has an internal battery. Storage for more than one year
may affect product life. Be sure to use a first-in, first-out inventory control system. For
more information, see "Environmental" on page 4.
Handle the R900 cellular endpoint carefully; however, no additional special handling is required.
After unpacking the R900 cellular endpoint, inspect it for damage. If the R900 cellular
endpoint appears to be damaged or proves to be defective upon installation, notify
your Neptune sales representative. If one or more items requires reshipment, use the
original cardboard box and packing material.
Figure 25 – R900 cellular endpoint - Pit w/Internal Antenna
< Image Placeholder>
Figure 26 – R900 cellular endpoint - Pit w/External Antenna
To Next Page
Loading...
Need help?
General
