R900 cellular endpoint Wall and Pit MIU Installation and Maintenance
37
Appendix A: Endpoint Modes
There is a single mode of operation for the R900 cellular endpoint, which provides
15-minute register interrogations with readings delivered every six hours.
Table 10 – Leak Status Flag Descriptions
Eighth digit incremented in all of the 96 days 15-minute intervals.
Flashing leak icon Eighth digit incremented in 50-95 of the 96 days of 15-minute intervals.
Eighth digit incremented less than 50 of the 96 days of 15-minute intervals.
Leak Status Flag (Resets After 35 Days)
Based on total amount of 15-minute periods recorded in the previous 24-hour period.
Number of days the “leak status” was at a minimum value.
Consecutive Days with Zero Consumption Flag (Resets After 35 Days)
To Next Page
Loading...
Need help?
General
