NETGEAR D6300

NETGEAR genie ADVANCED Home
59
D6300 WiFi DSL Modem Router
7. From the Priority list, select the priority that this traffic should receive relative to other
applications and traffic when accessing the Internet. The options are Low, Normal, High, and
Highest.
8. Click Appl
y to save this rule to the QoS Policy list and return to the QoS Setup screen.
QoS for a WiFi DSL Modem Router LAN Port
 To create a QoS policy for a device connected to one of the WiFi modem router’s LAN
ports:
1. Select ADV
ANCED > Setup
> QoS Setup to display the QoS Setup screen. Select the
Turn Internet Access QoS On check box.
2. Click the Setup QoS Rule butt
on.
3. Click the Add P
riority Rule button.
4. From the Priority Category list,
select Ethernet LAN Port, as shown in the following figure:
5. From the LAN port list, select the LAN port that has a QoS policy.
6. From the Priority list, select the
priority that this port’s traffic should receive relative to other
applications and traffic when accessing the Internet. The options are Low, Normal, High, and
Highest.
7. Click Appl
y to save this rule to the QoS Policy list and return to the QoS Setup screen.
8. In the QoS Setup screen,
click Apply.
QoS for a MAC Address
 To create a QoS policy for traffic from a specific MAC address:
1. Select ADVANCED
> Setup > QoS Setup, and click the Setup QoS Rule button. The
QoS Setup screen displays.
2. Click Add P
riority Rule.
3. From the Priority Category list,
select MAC Address to display the following screen:
4. From the Priority list, select the priority that this device’s traffic should receive relative to
other applications and traffic when accessing the Internet. The options are Low, Normal,
High, and Highest. Click Add to add this rule to MAC Device List.
5. Click Appl
y to save this rule to the QoS Policy list and return to the QoS Setup screen.
6. In the QoS Setup screen,
select the Turn Internet Access QoS On check box.