EasyManuals Logo
Home>NETGEAR>Network Router>GC510P

NETGEAR GC510P User Manual

NETGEAR GC510P
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
PoE Applications
This section covers the following topics:
PoE Overview on page 18
Connect PoE Equipment in a Business Environment on page 19
Connect PoE Equipment for Surveillance and Security on page 20
PoE Overview
The switch supports eight Power over Ethernet Plus (PoE+) ports and can supply up to 30W PoE+ (IEEE
802.3at) to each port up to its total maximum PoE power budget of 134W (model GC510P) or 195W (model
GC510PP) across all active PoE+ ports.The switch is backward compatible with PoE (IEEE 802.3af).
Supplied power is prioritized according to the port order, up to the total power budget of the device. Port 1
receives the highest PoE priority, while port 8 is relegated to the lowest PoE priority.
If the power requirements for attached devices exceed the total power budget of the switch, the PoE power
to the device on the highest-numbered active PoE+ port is disabled to make sure that the devices connected
to the higher-priority, lower-numbered PoE+ ports are supported first.
Although a device is listed as an 802.3at PoE+–powered or 802.3af PoE–powered device, it might not
require the maximum power limit that is specified by its IEEE standard. Many devices require less power,
allowing all eight PoE+ ports to be active simultaneously when the devices correctly report their PoE class
to the switch.
Using the local browser interface, you can control how PoE power is allocated across active PoE+ ports by
overriding the default or autodetected PoE power limits for individual PoE+ ports.
Applications
18
Insight Managed 8-Port Gigabit Ethernet PoE+ Smart Cloud Switch with 2 SFP Fiber Ports

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR GC510P and is the answer not in the manual?

NETGEAR GC510P Specifications

General IconGeneral
Switch typeManaged
Quality of Service (QoS) supportYes
Console portRJ-45
Power connectorDC-in jack
Installed SFP modules quantity2
Installed SFP+ modules quantity0
Basic switching RJ-45 Ethernet ports typeGigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity8
10G supportNo
Networking standards-
MAC address table- entries
Product colorGray
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Total Power over Ethernet (PoE) budget134 W
Operating temperature (T-T)0 - 45 °C
Weight and Dimensions IconWeight and Dimensions
Depth188 mm
Width314 mm
Height44 mm
Weight2010 g

Related product manuals