NETGEAR GC510P User Manual

Features
The switch includes the following key hardware features:
• Eight Gigabit Ethernet ports.
• Two dedicated Gigabit SFP fiber ports.
• PoE and PoE+ on copper ports:
- Eight ports PoE+ supporting both IEEE 802.3af and IEEE 802.3at
- Total PoE power budget of 134W (model GC510P) or 195W (model GC510PP)
• MAC table size of 16K entries.
• Switch fabric full duplex nonblocking.
• Includes the following mounting hardware:
- Four rubber footpads for tabletop installation
- Wall-mount screw kit for wall installation
- Rack-mount brackets and screw kit for rack-mount installation in a standard 19-inch rack
• Full compatibility with IEEE standards:
- IEEE 802.3 Ethernet
- IEEE 802.3u 100BASE-T
- IEEE 802.3ab 1000BASE-T
- IEEE 802.3z Gigabit Ethernet 1000BASE-SX/LX
- IEEE 802.1Q VLAN tagging
- IEEE 802.3x Full-duplex flow control
- IEEE 802.3ad Link aggregation (LAG with LACP)
- IEEE 802.1ab LLDP
- IEEE 802.1p Class of Service (QoS)
- IEEE 802.1D Spanning Tree Protocol (STP)
- IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)
- IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
- IEEE 802.1x RADIUS network access control
- IEEE 802.3az Energy Efficient Ethernet (EEE)
- IEEE 802.3af (PoE)
- IEEE 802.3at (PoE+)
Introduction
7
Insight Managed 8-Port Gigabit Ethernet PoE+ Smart Cloud Switch with 2 SFP Fiber Ports

NETGEAR GC510P Specifications

General

Switch type	Managed
Quality of Service (QoS) support	Yes
Console port	RJ-45
Power connector	DC-in jack
Installed SFP modules quantity	2
Installed SFP+ modules quantity	0
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity	8
10G support	No
Networking standards	-
MAC address table	- entries
Product color	Gray
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Total Power over Ethernet (PoE) budget	134 W
Operating temperature (T-T)	0 - 45 °C

Weight and Dimensions

Depth	188 mm
Width	314 mm
Height	44 mm
Weight	2010 g