1
Introduction
This hardware installation guide is for the following NETGEAR Insight managed switch models:
• 8-Port Gigabit Ethernet PoE+ Insight Managed Smart Cloud Switch with 2 SFP Fiber Ports, Model GC510P
• 8-Port Gigabit Ethernet High-Power PoE+ Insight Managed Smart Cloud Switch with 2 SFP Fiber Ports,
Model GC510PP
The switch provides eight Gigabit Ethernet RJ-45 copper ports and two dedicated Gigabit SFP fiber ports.
Both models support Power over Ethernet Plus (PoE+) on all eight RJ-45 copper ports so that you can let the
switch provide power to devices that are PoE and PoE+ capable, such as WiFi access points, VoIP phones,
and IP security cameras.The switches differ in their maximum PoE power budget:
• Model GC510P.This model can supply up to 30W PoE (IEEE 802.3at) to each port, with a maximum PoE
power budget of 134W across all active PoE+ ports.
• Model GC510PP.This model can supply up to 30W PoE (IEEE 802.3at) to each port, with a maximum PoE
power budget of 195W across all active PoE+ ports.
The hardware installation guide complements the installation guide that came with your switch.
This chapter serves as an introduction to the switch and includes the following sections:
• Overview
• Features
• Safety Instructions and Warnings
For more information about the topics that are covered in this manual, visit the support website
at support.netgear.com.
Note
For technical specifications, see the data sheet at
netgear.com/business/products/switches/app-managed-smart-cloud/gigabit-switch.aspx#tab-resources.
For switch documentation, visit downloadcenter.netgear.com.
Note
5