NETGEAR ProSafe FVS114 User Manual

Reference Manual for the ProSafe VPN Firewall FVS114
6-26 Advanced Virtual Private Networking
202-10098-01, April 2005
f.
You will now see the “FVS114” entry in the Active Self Certificates table and the pending
“FVS114” Self Certificate Request is gone, as illustrated below.
Figure 6-14: Self Certificates table
7. Associate the new certificate and the Trusted Root CA certificate on the FVS114.
a. Create a new IKE policy called Scenario_2 with all the same properties of Scenario_1
(see “Scenario 1 IKE Policy” on page 6-19) except now use the RSA Signature instead of
the shared key.
Figure 6-15: IKE policy using RSA Signature
b.
Create a new VPN Auto Policy called scenario2a with all the same properties as
scenario1a except that it uses the IKE policy called Scenario_2.
FVS114

NETGEAR ProSafe FVS114 Specifications

General

Brand	NETGEAR
Model	ProSafe FVS114
Category	Firewall
Language	English