NETGEAR ProSafe FVS114 User Manual

Reference Manual for the ProSafe VPN Firewall FVS114
Advanced Virtual Private Networking 6-27
202-10098-01, April 2005
Now, the traffic from devices within the range of the LAN subnet addresses on FVS114 A and
Gateway B will be authenticated using the certificates rather than via a shared key.
8. Set up Certificate Revocation List (CRL) checking.
a. Get a copy of the CRL from the CA and save it as a text file.
Note: The procedure for obtaining a CRL differs from a CA like Verisign and a CA such
as a Windows 2000 certificate server, which an organization operates for providing
certificates for its members. Follow the procedures of your CA.
b. From the main menu VPN section, click the CRL link.
c. Click Add to add a CRL.
d. Click Browse to locate the CRL file.
e. Click Upload.
Now expired or revoked certificates will not be allowed to use the VPN tunnels managed by
IKE policies which use this CA.
Note: You must update the CRLs regularly in order to maintain the validity of the
certificate-based VPN policies.

NETGEAR ProSafe FVS114 Specifications

General

VPN Support	Yes
Number of Ports	4
Power Supply	12V DC, 1A
VPN tunnels	Up to 5
Protocols	IPSec, PPTP
Port Speed	10/100 Mbps
DoS/DDoS Protection	Yes
URL Filtering	Yes
Weight	1.5 lbs
Firewall features	Stateful Packet Inspection
Firewall Type	Stateful Packet Inspection (SPI)
Interfaces	4 x 10/100 Mbps Ethernet ports, 1 x 10/100 Mbps WAN port