A-1
v1.0, December 2006
Appendix A
Specifications and Storage Technology Standards
This appendix provides the Storage Central default settings and technical specifications, and
information about storage technology standards.
Factory Default Settings
The Storage Central ships with the default settings shown in the following table. Pressing the reset
button on the rear panel returns the Storage Central to these settings (except the hardware settings)
.
Feature Factory Default Setting
Hardware
On/Off switch
(Storage Central Turbo SC101T
only)
Off
hard disk drives None installed
Administration and Management
Login name (case sensitive) admin
Login password (case sensitive) password
Smart Wizard Enabled
Network and Storage
IP configuration DHCP client
Port speed Auto-negotiation
Port duplex Auto-negotiation
Gigabit port type Auto detect
Mirroring Disabled
Partitions None (detached from all PCs)
To Next Page
Loading...
Need help?
General
