EasyManua.ls Logo

Newport iServer MicroServer EIS-PCB - Part 5: Specifications

Default Icon
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
40
PART 5
SPECIFICATIONS
SERIAL INTERFACE
Interface:
RS-232, RS-422, RS-485 CMOS, or TTL
Connector:
Pin header holes (0.1” pitch)
Data Rates:
300 to 115200 bps
Characters:
7 or 8 data bits
Parity:
odd, even, or none
Stop bits:
1 or 2
Flow Control:
Software (Xon/Xoff)
Hardware (CTS/RTS)
Digital I/O’s:
4 digital input/output lines
NETWORK INTERFACE
Interface:
Ethernet 10 Base-T
Connector:
RJ45
Protocols:
ARP, TCP/IP, ICMP, DNS, DHCP,
Telnet simulation and HTTP
Indicators (LED):
Network Activity (red),
Network Link (green),
TX-Transmit (yellow),
RX-Receive (green),
PROCESSOR
CPU:
Enhanced 8051, 22 MHz
Memory:
16 Kbyte SRAM, 512 Kbyte Flash
Management:
Serial Login, Telnet Login,
Internal Web Server
EMBEDDED WEB SERVER
Uses: Dynamic web pages and Java
applets (256 Kbyte capacity)
ENVIRONMENTAL
EIS-PCB and EIS-PCB-TTL
Operating Temperature:
0 to 70°C (32 to 158°F)
EIS-PCB-ET and EIS-PCB-TTL-ET
Operating Temperature:
-4
0 to 85°C (-40 to 185°F)
Storage Temperature:
-40 to 125°C (-40 to 257°F)
Board Surface Area:
approximately 3 sq. inches
Weight:
23g (0.05 lbs).
POWER
Power Input
5 Vdc
Consumption:
0.7W average / 1 W max
GENERAL
Agency Approvals
FCC-B, C/UL, CE
Software
Firmware upgradeable. Compatible with
Windows 9x / ME / NT / 2000 / XP
software and related utilities

Table of Contents