XPS-Q8 Controller Appendix
24.3 DC Motor Driver XPS-DRV03
Figure 73: XPS-DRV03 Motor Driver Connectors.
24.4 Pass-Through Board Connector (25-Pin D-Sub) XPS-DRV00
WARNING
The Pass-through board connector replaces the motor interface
connector only if the axis is connected to an external motor driver.
Figure 74: DRV00 Pass-Through Connector.
Analog A output and Analog B output have 16 bit resolution at ±10 V output. These
signals are used to command an external driver.
215 XPSDocumentation V1.4.x (EDH0301En1060 — 10/17)
To Next Page
Loading...
