XPS-Q8 Controller User’s Manual
Figure 9: Axis Driver Card.
Please see the next section for installation instructions.
NOTE
Power Input: 100–240 V, 50–60 Hz, 11 A–5.5 A.
2.7 Ethernet Configuration
Figure 10: Ethernet Configuration.
2.7.1 Communication Protocols
The Ethernet connection provides a local area network through which information is
transferred in units known as packets. Communication protocols are necessary to dictate
how these packets are sent and received. The XPS Controller/Driver supports the
industry standard protocol TCP/IP.
TCP/IP is a “connection” protocol and in this protocol, the master must be connected to
the slave in order to begin communication. Each packet sent is acknowledged when
received. If no acknowledgment is received, the information is assumed lost and is
resent.
11 XPSDocumentation V1.4.x (EDH0301En1060 — 10/17)
To Next Page
Loading...
