XPS-Q8 Controller User’s Manual
3.8.3 Manual Configuration for non Newport stages
For configuring the XPS controller to stages or positioning devices not made by
Newport, use the tool “Add Custom Stage” under the main tab STAGE. For detailed
information about this tool, please refer to the document ConfigurationWizard.pdf
provided under the main tab DOCUMENTATION.
3.9 System Shut-Down
To shut down the system entirely, perform the following procedure:
Wait for the stage(s) to complete their moves and come to a stop.
Turn off the power using the power switch located above the power cord at the back of
the controller.
35 XPSDocumentation V1.4.x (EDH0301En1060 — 10/17)
To Next Page
Loading...
