Newport XPS-Q8 - Configuring the XPS for Connection to a Corporate Network Using Dynamic IP Configuration

XPS-Q8 Controller User’s Manual
3.5.5 Configuring the XPS for Connection to a Corporate Network Using Dynamic IP
Configuration
It is recommended to ask your IT department to configure the XPS to your network to
avoid any issue with your network policies and rules.
• Configure your connection as described in §3.5.3 for REMOTE connection
• Connect the host plug to your network using a direct cable.
• Get to CONTROLLER CONFIGURATION=> IP management web page
• Select dynamic IP as shown below:
Click the SET button and the following screen appears:
Go to the TERMINAL window, double click on the Reboot function, then press the
Execute button:
21 XPSDocumentation V1.4.x (EDH0301En1060 — 10/17)