Newport XPS-Q8 - Auto Configuration

XPS-Q8 Controller User’s Manual
3.8.1 Auto Configuration
When logged in as Administrator, select SYSTEM, then “Auto configuration”. The
following screen appears:
If you want to continue, click the "Yes, I confirm" button and the following page
appears:
Check, if all connected stages are recognized by the system. If yes, click “GENERATE
CONFIGURATION FILES”.
The controller reboots and the following screen appears (this may take up to 16
seconds):
Click “OK”.
When the controller has finished booting (a second beep after 12-18 seconds), press
“F5” to reload the page, select FRONT PANEL, and then select “Move”. The
following screen appears:
29 XPSDocumentation V1.4.x (EDH0301En1060 — 10/17)