XPS-Q8 Controller Software Tools
3. When all arguments are defined, click “OK”. Now review the final syntax of the
function and make final text changes, as needed. When done, click “Execute”.
4. When the function is executed, the controller’s response will appear in the Received
message window. A returned 0 means that the function has been executed
successfully. In all other cases, there will be an error code. Use the function
ErrorStringGet() to get more information about the error.
The functions are listed in alphabetical order. Only those functions that are listed are
available from the current system configuration. For example, if the system consists
only of SingleAxis groups, no group specific functions for Spindles, XY groups, XYZ
groups or MultipleAxis groups will be listed.
XPSDocumentation V1.4.x (EDH0301En1060 — 10/17) 58
To Next Page
Loading...
