Set whether the present measurement values from
VVM 310 are to be saved in a log on the USB memory.
Log for longer periods
1. Set the desired interval between loggings.
2. Tick “activated".
3. The present values from VVM 310 are saved in a
file in the USB memory at the set interval until
“activated" is unticked.
Caution
Untick "activated" before removing the USB
memory.
Menu 7.3 - manage settings
PDQDJH VHWWLQJV
VDYH VHWWLQJV
UHFRYHU VHWWLQJV
Here you can manage (save as or retrieve from) all the
menu settings (user and service menus) in VVM 310
with a USB memory.
Via "save settings" you save the menu settings to the
USB memory in order to restore them later or to copy
the settings to another VVM 310.
NOTE
When you save the menu settings to the USB
memory you replace any previously saved set-
tings on the USB memory.
Via "recover settings" you reset all menu settings from
the USB memory.
NOTE
Reset of the menu settings from the USB
memory cannot be undone.
57Chapter 9 | ServiceNIBE™ VVM 310
To Next Page
Loading...
