Safety information Product information Mechanical installation Electrical installation Multi axis system design Technical data
46 Digitax HD M75X Series Installation and Technical Guide
Issue Number: 5
Figure 3-31 Re-fitting frame 3 cooling fan assembly
1. For correct orientation, position the fans with the adhesive label and supply cables as shown in Figure 3-31.
2. Use a flat blade tool to fully re-engage the clips into location by pushing on the end of the clips.
Table 3-14 Fan replacement kit
Model Fan part number
Frame size 1 and 2 fan kit 9500-1053
Frame size 3 fan kit 9500-1054
To Next Page
Loading...
