Nidec NE200 Series - Group F7: Output Terminal

NE200&300 Quick Start Guide
45
Code Description Setting range Default Modify
Modbus
Address
Thousands: Logic of
X8 terminal
Note:
Terminal 24 、 25 、 26 、 27 、
42 、 43 、 44 and 49 are not
impacted by this
parameter.
Group F7: Output terminal
Code Description Setting range Default Modify
Modbus
Address
F7.00
② Reserve
0: NULL
1: RUN
2: Freq. arrival(FAR)
3: Freq. level
detection 1 (FDT1)
4: Freq. level
detection 2 (FDT2)
5: Freq. detection
when speed-up
6: Freq. detection
when speed-down
7: Zero-speed
running
8: Zero-speed
9: PLC circulation
completion
10: Reserved
11: Ready for
running (RDY)
12: Timing arrival
13: Counting arrival
14: Reserved
15: Preset torque
value arrival
16: Drive fault output
Reserve Reserve 0800H
③
DO terminal
output definition
0 ○ 0800H
F7.01
Y1 terminal
output selection
1 ○ 0801H
F7.02
② Reserve Reserve Reserve 0802H
③
Y2 terminal
output
selection
0 ○ 0802H
F7.03
Relay 1
(TA/TB/TC)
output selection
16 ○ 0803H
F7.04 ② Reserve Reserve Reserve 0804H
F7.04
③ Relay 2
(BRA/BRB/BRC)
output selection
0 ○ 0804H