Nidec NE200 Series - FC: Protection and Fault Parameters

NE200&300 Quick Start Guide
55
Code Description Setting range Default
Mod
ify
Modbus
Addres
s
Freq.7 selection potentiometer
4: Pulse input
Group FA: Wobble Frequency
Code Description Setting range Default Modify
Modbus
Address
FA.00
Wobble
amplitude
0.0~50.0% 0.0% ○ 0B00H
FA.01 Jitter frequency 0.0~50.0%(to FA.00) 0.0% ○ 0B01H
FA.02 Jitter Time 5 ～ 50ms 5ms ○ 0B02H
FA.03
Wobble freq. up
time
0.1 ～ 999.9s 5.0s ○ 0B03H
FA.04
Wobble freq.
down time
0.1 ～ 999.9s 5.0s ○ 0B04H
FA.05 Amplitude mode
0: Relative to the
central freq.
0 ○ 0B05H
1: Relative to Max.
frequency
Group Fb: Fixed Length
Code Description Setting range Default Modify
Modbus
Address
Fb.00 Preset length 0 ～ 65530 0 ○ 0C00H
Fb.01 Actual length 0 ～ 65530 0 * 0C01H
Fb.02
Pulses number
per unit
0.1 ～ 6553.0 100 ○ 0C02H
Group FC: Protection and Fault Parameters
Code Description Setting range Default Modify
Modbus
Address
FC.00 Motor overload 0: Disabled 1 × 0D00H