24 SM-Applications Modules & Motion Processors User Guide
Issue Number: 4
4.7 Using SyPTLite
The SyPTLite program provides an alternative development platform to SyPTPro for
the Applications Lite module, the applications Lite V2 module and the Digitax ST
Indexer.
SyPTLite is the ‘entry’ level programming tool which is delivered free-of-charge with the
drive and can be used straight out of the box for programming in quick ladder logic.
Connectivity to the PC is the same as mentioned in section 4.2 Connecting the PC to
the Second Processor on page 21.
When using SyPTLite there is a choice of 3 targets when you create a new ladder
diagram, Drive Onboard, module or Commander SK.
Figure 4-3 Node Properties
Upon choosing SM-Applications Lite, you have the option of 3 tasks to choose from.
Background, Clock or Initial. You will only be able to use
one of these tasks for the
whole program.
In the ‘Communications’ settings from the drop-down menu the following box will
appear.
Figure 4-4 Communications Settings Dialogue
All of the programming in SyPTLite is in ladder and you are limited to 10 kb of
executable memory. For further information see Help in SyPTLite.
To Next Page
Loading...
Need help?
General
