107
Advanced Camera Settings – The Set-up Menu
Use this option to change the interface settings for connecting the camera to
a computer, printer, or video device.
When Auto transfer is set to On, all pictures are automatically marked with
the E icon after shooting and set for transferring.
The E Transfer Marking Icon
When the camera is connected to a computer via the UC-E6 USB cable (P.62), the pictures marked
with the E icon will be transferred automatically by pressing d. When connected via an access
point, select Marked Images in the WIRELESS MENU, then press d to transfer pictures with the
E icon.
Interface (USB/Video Mode)
k
USB
Select Mass storage or PTP for connecting to a computer or printer
(P.64).
Video mode
Select NTSC or PAL to match the video standard used in the connected
device (P.61).
Auto Transfer
E
F Off
Pictures are not marked with the E icon after shooting.
E On
(default setting)
Marks all pictures with the E icon and sets them for transferring.
The E Icon on Stored Pictures
Use the Transfer marking option (P.95) in the Playback menu to add or remove the E icon on
stored pictures.
To Next Page
Loading...
