Nikon CoolPix P3 - Wireless Transfer Configuration Details

112
Wireless Transfer Mode
Configuration Procedure
After starting the Setup Utility, perform the following steps to configure a profile de-
vice.
• For more information on the procedure below, see “Configuration Details” (P.114).
• For more information on the options for steps 5 and 6 when selecting Create Pro-
file manually, see “Information about Profile Configuration” (P.118).
•Click Help to display more information on each step. To cancel configuring a profile
device, click Cancel in a window.
c : Perform step — : Skip step
1
Confirm that your camera’s battery is inserted and fully charged.
2
Confirm that your computer supports wireless networking.
3
Confirm that camera is connected to computer via USB cable.
4
Select type of configuration from options that are displayed.
If your computer has a fixed IP address, does not have a wireless network set up using
Windows XP’s built-in wireless network features, runs Windows XP SP1, or is a Mac-
intosh, the Setup Utility automatically goes to Create Profile manually.
Create an
Infrastruc-
ture (Access
Point) net-
work pro-
file
Create an
Ad-hoc
(Camera to
Computer)
network
profile
Create
Infrastruc-
ture (Access
Point) and
Ad-hoc
(Camera to
Computer)
network
profile
Create Pro-
file manu-
ally
ÆÆÆÆ
5
Set profile name
and icon.
cccc
ÆÆÆÆ