Nikon D3 VBA18001 - Page 20

- Ｄ  ･ -
VBA18001-R.3719.A
logo�Q0440�forGraphic
070518�Gdesign�ito
・
Disconnect the four FPCs from each connector.
・
Take out the three screws (#1532).
・
Remove the main PCB (#5001).
Main PCB unit
#5030
#1532×3
Main PCB #5001
・
Unsolder the two wires (that are connected from DC-IN PCB unit).
・
Disconnect the connection-FPC from the connector.
Connection-FPC unit
BLACK: DC-IN PCB unit
ORANGE: DC-IN PCB unit
Connection-FPC unit
INC