Nikon D3 VBA18001 - Page 98

- Ａ 0 ･ -
VBA18001-R.3719.A
logo�Q0440�forGraphic
070518�Gdesign�ito
・Set the same port as conrmed by the device manager.
・Open "Device Manager" and conrm the port setting."Device Manager" and conrm the port setting.Device Manager" and conrm the port setting." and conrm the port setting. and conrm the port setting.
Click the right mouse button on "My Computer". Then, select the items in the following order:"My Computer". Then, select the items in the following order:My Computer". Then, select the items in the following order:". Then, select the items in the following order:. Then, select the items in the following order:
[Properties] → [Hardware] → [Device Manager].
Note:The port setting differs depending on the PC environment.
e.g. Setting to COM4
COM number differs
depending on the PC
environment.
INC