385
U
2 Select the first image.
Use the multi selector to
highlight the first photograph
in the overlay.
To view the
highlighted photograph full
frame, press and hold the X
button.
To view images in other locations, press W and select
the desired card and folder as described on page 242.
Press J
to select the highlighted photograph and return to the
preview display.
3 Select the second image.
The selected image will appear as Image 1.
Highlight Image 2
and press J, then select the second photo as described in
Step 2.
4 Adjust gain.
Highlight Image 1 or Image 2
and optimize exposure for the
overlay by pressing 1 or 3 to
select the gain from values
between 0.1 and 2.0.
Repeat for
the second image.
The default value is 1.0; select 0.5 to halve
gain or 2.0 to double it.
The effects of gain are visible in the
Preview column.
To Next Page
Loading...
