357
Creating a Movie from Photos (Time-Lapse Movie)
D
Image Review
The
K
button cannot be used to view pictures while shooting is in
progress. The current frame will however be displayed for a few seconds
after each shot if [On] is selected for [Image review] in the playback
menu. Note that other playback operations cannot be performed while
the frame is displayed. The current frame may not be displayed if the
interval is very short.
D
Time-Lapse Movies
•
Sound is not recorded with time-lapse movies.
•
The shutter speed and the time needed to record the image to the
memory card may vary from shot to shot. As a result, the interval
between a shot being recorded and the start of the next shot may vary.
•
Shooting will not begin if a time-lapse movie cannot be recorded at
current settings, for example if:
- The value selected for [Interval] is longer than that selected for
[Shooting time]
-[00:00'00"] is selected for [Interval] or [Shooting time]
-[On] is selected for both [Silent photography] and [Interval
priority] and [00:00'0.5"] is selected for [Interval]
- The memory card is full
•
The
K
button cannot be used to view pictures while time-lapse
recording is in progress.
•
For consistent coloration, choose a white balance setting other than
[Auto] or [Natural light auto] when recording time-lapse movies.
•
Regardless of the option selected for Custom Setting c2 [Standby
timer], the standby timer will not expire while recording is in progress.
To Next Page
Loading...
