VBA10401-R.3623.A
- Ａ32 ･ -
Red: Lighting unit control PCB
White: Lighting unit control PCB
Tape (#709)
Solder Shield wires
Fiber optics
Note
）
Both ends of the -
ber optics are just pinched
in individual parts, and not
adhered.
SB upper case
・
Attach the SB uper case on the SB lower case.
（
Fig.1
）
・
By pushing the pop-up lever A part of the top cover unit, activate pop-up of the built-in SB.
・
Conrm that the hooking lever of the SB upper case is hooked to 2 holes.
（
Fig.2
）
・
Attach 2 screws (#631).
Hooking lever
Fig.1
#631×2
Pop-up lever A part
SB lower case unit
SB upper case
Fig.2
#304×2
Position for attaching #304
#304×2
To Next Page
Loading...
