VBA10401-R.3623.A
- Ａ33 ･ -
Top cover
・
Assemble the eyepiece frame (#B271) by putting the
diopter adjusting lever at the lowermost position.
・
After pushing outside the AE/AF lock button from the
inside of the top cover, assemble the top cover (#B23).
・
After assembling the top cover, slide the diopter
adjusting lever to check the movement of the diopter
adjustment lens.
Also, check the clicking feeling of the AE/AF lock
button, too.
AE/AF lock button
Diopter adjusting lever
#B271
#B23
#
642
#
618
#
618
#642
#635
#613
・
Attach 6 screws.
Blue×2
Black×2
Black
Gray
White
Orange
・
Solder 9 wires.
・
Connect FPC (#1026) to the connector.
Black
：
Top cover GND
：
SB lighting
unit
:Buzzer
:Main PCB
#1026
To Next Page
Loading...
