2 Microscopy
8
IC Inspection Microscope ECLIPSE L200ND / L200N Instructions
2.4 Episcopic bright-field simplified polarization microscopy
1.
Attach the analyzer and polarizer.
Í
Slide them out to the click-stop position.
2.
Observe the sample by following the steps for the episcopic bright-field microscopy.
---------------------------------------------------------------------
See “2.1 Episcopic bright-field microscopy”
3.
Switch to the episcopic bright-field simplified polarization microscopy.
Adjust brightness
with the ND filters.
Press in the polarizer
and the analyzer.
Adjust brightness
with the brightness
control dial.
4.
After episcopic bright-field simplified polarization microscopy, return to bright-field
microscopy, if required.
Adjust brightness
with the ND filters.
Slide out the polarizer
and analyzer.
Adjust brightness
with the brightness
control dial.
To Next Page
Loading...
Need help?
General
