Nikon ECLIPSE L200ND / ECLIPSE L200N - 7 Technical Specifications

7 Technical Specifications
 55 
IC Inspection Microscope ECLIPSE L200ND / L200N Instructions
7
Technical Specifications
Table-9 Technical specifications
Model ECLIPSE L200ND, ECLIPSE L200N
Input rating 100V-240V AC ±10%, 50/60 Hz, 1.2 A or less
Power cord • When used in 100-120 V region, outside Japan
UL listed detachable power cord set, 3 conductor grounding (3 conductor
grounding Type SVT, No. 18 AWG, 3 m long maximum, rated at 125 VAC
minimum)
• When used in 220-240 V region
Detachable power cord set approved according to EU/EN standard, 3
conductor grounding (3 conductor grounding Type H05VV-F, 3 m long
maximum, rated at 250 VAC minimum)
• When used inside Japan
PSE approved detachable power cord set, 3 conductor grounding (3
conductor grounding Type VCTF 3 x 0.75 mm
2
, 3 m long maximum, rated
at 125 VAC minimum)
Lamp and
lamphouse
Lamphouse: 12V 50W precentered lamphouse
manufactured by Nikon
Model: LV-LH50PC
Halogen lamp: 12V 50W LONGLIFE halogen lamp
Model: LV-HL50W
Average service life of the lamp: 1100h
Operating
environment
conditions
Installation area: 710 mm (W) x 940 mm (D) or larger
Temperature: +5°C to +35°C
Humidity: Relative humidity of 85% RH max.
(non-condensing)
Altitude: 2000 m max.
Pollution: Degree 2
Installation category: Category II
Electric shock protection class: Class I
Indoor use only
Transport and
storage environment
conditions
Temperature: -20°C to +60°C
Humidity: Relative humidity of 90% RH max.
(non-condensing)