16
Install Batteries and Check Battery Power
Use four 1.5V AA-type alkaline-
manganese or lithium batteries.
(See page 88 for other power
sources.)
1
1.1
Turn the power switch off, and turn the battery
holder release knob toward ◊ to release the lock.
1.2
• Incorrect positioning of + and – poles may damage the camera.
Remove the battery holder and insert batteries with
the “+” and “–” ends positioned as marked on the
battery holder.
1.3
Return battery holder to battery chamber and turn
the battery holder release knob opposite to ◊ to
lock the holder firmly.
F100_En_16 7/8/05 8:06 PM Page 16
To Next Page
Loading...
