79
Accessory Shoe/Sync Terminal/Ready-Light
Flash
• Accessory shoe
• An optional Speedlight such as SB-800, SB-600, SB-80DX, SB-50DX, SB-30,
SB-29s/29, SB-28/28DX, SB-27, SB-23 or SB-22s can be attached directly to
the accessory shoe of the F100 without a cord. This accessory shoe is
equipped with a safety-lock which prevents accidental drop when a Speedlight
with a safety-lock pin (SB-800, SB-600, SB-80DX, SB-30, SB-29s/29, SB-28/
28DX, SB-27, SB-26, SB-25 or SB-22s) is attached.
• Sync terminal
• To use a Speedlight that requires a sync cord, attach one end of the sync cord
to the sync terminal.
When a Speedlight such as SB-800, SB-600, SB-80DX, SB-50DX, SB-30,
SB-29s/29, SB-28/28DX, SB-27, SB-23 or SB-22s is attached to the F100’s
accessory shoe and rear-curtain sync is performed, do not attach additional
Speedlight via sync terminal.
• Ready-light
• When using a Speedlight such as the SB-800, SB-600, SB-80DX, SB-50DX,
SB-30, SB-29s/29, SB-28/28DX, SB-27, SB-23 or SB-22s, the ready-light fi
lights up when the Speedlight is fully charged and ready to fire.
• If the ready-light blinks approx. 3 sec. after full flash output, underexposure
may have occurred (when the Speedlight is set to TTL or non-TTL auto flash
mode). Check the focus distance, aperture or flash shooting distance range
and shoot again.
F100_En_16 7/8/05 8:06 PM Page 79
To Next Page
Loading...
