61
Exposure
3
Compose picture, confirm focus indicator / and
shoot.
• The first shot is taken when the shutter release button is fully depressed.
The film does not advance and multiple exposures can be taken from the
second shutter release.
• The film does not advance and the frame counter does not count up as
long as the film advance mode selector is set to Z.
• To cancel multiple exposure, set the film advance mode selector to a
position other than Z. Film is advanced when the exposure meter is on
and the shutter release button is lightly pressed. When the film is
advanced, frame counter counts up.
· 14: The film advance mode in multiple exposure is normally set to single-
frame shooting. However, it can be set to continuous shooting (page 73).
F100_En_16 7/8/05 8:06 PM Page 61
To Next Page
Loading...
