B–7
B
Operation
Basic Operations
Compatible batteries and replacement/recharging
When replacing batteries, use four fresh AA-size batteries of the same brand. Refer
to the following table to determine when to replace batteries with fresh ones or
recharge batteries according to how long the fl ash-ready indicator takes to come
on.
Battery type
Time the fl ash-ready indicator takes to
come on
1.5 V LR6 (AA-size) alkaline battery 20 seconds or more
1.5 V FR6 (AA-size) lithium battery 10 seconds or more
1.2 V HR6 (AA-size) rechargeable Ni-MH
battery
10 seconds or more
For minimum recycling time and number of flashes for each battery type, refer to •
“Specifications.” (0H-21)
Alkaline battery performance may vary greatly depending on the manufacturer.•
1.5 V R6 (AA-size) carbon-zinc batteries are not recommended.•
Using an optional external power source increases the number of flashes and •
provides shorter recycling times. (0H-11)
v Additional precautions regarding batteries
Read and follow battery warnings and cautions (• 0A-14 – A-18).
Be sure to read and follow the warnings for the battery on the section, “Notes on •
Batteries” (0H-7), before using the battery.
The recycling time can be longer when FR6 (AA-size) lithium batteries are used •
because they incorporate a function that suppresses the output current when
heat is generated in the batteries.
To Next Page
Loading...
