Nivus OCM PRO CF - Page 72

Instruction manual
OCM Pro CF
page 72 OCM Pro CF - Rev. 09 as of 07.06.2016
®
1 MAC address OCM Pro CF
2 Serial number OCM Pro CF
3 Transmitter firmware version with date of creation
4 CS2 sensor firmware version with date of creation
5 POA sensor 2 firmware version with date of creation
6 POA sensor 3 firmware version with date of creation
7 OCL sensor firmware version with date of creation
8 EBM electronic box firmware with date of creation
Fig. 9-3 Info on firmware and version number
Pressing the "right" arrow key indicates additional information on the connected
and activated sensors:
1 Sensor number
2 Firmware version with date of creation
3 Serial number
4 Sensor type
Fig. 9-4 Additional sensor information