48
6. Phone book functions
Storing names and numbers
1
Press Names.
2
Roll to Add entry and press
Navi
Roller
.
3
Key in the name and press OK.
Press a number key repeatedly until
the desired character appears. Press
for a space. See also “Writing
text” on page 35.
4
Key in an area code and phone
number, and press OK.
If you key in the + character for the
international prefix (by pressing
twice) in front of the country
code, you can also use the phone
number when calling from abroad.
Quick Save:
Key in the phone
number and press Options,
press OK at Save highlighted.
Then enter the name and press
OK.
Storing multiple
numbers per name
You can use your phone as a contact
manager, since the phone’s internal
phone book allows you to store
multiple phone numbers as well as text,
such as an E-mail address, a street
address or a note under a name.
Note:
Multiple numbers per
name can be stored only in the
phone’s memory. Before storing
any names and numbers, select
the phone memory. For
instructions, see page 17.
The first number stored under a name is
automatically set as the default
number. When you select a name from
the phone book (for example, to make a
call or send a text message), the default
number is used unless you select
another number. For example, when
you press and hold
Navi Roller
at a
highlighted name, the phone will make
a call to the default number.
For each number or text item you can
select a number type. If you do not
select any number type, will be used
as the number type. The default number
is indicated by the box around the
number type icon, for example, .
To add a new number or text item
to a name:
1
Once in the names list, roll with
Navi Roller
to the desired name.
To Next Page
Loading...
