54
Default is the tone selected for
the currently selected profile.
Group graphic
To set the phone to display the
group graphic, roll to On and press
Navi Roller.
The option list includes options
for viewing and sending (Send
graphic) the graphic as an Over
The Air (OTA) message, if
supported by your network.
You can also receive a new group
graphic to your phone as an OTA
message. When you receive a
group graphic, press Show, then
press Options, select Save or
Discard and press Navi Roller.
If you selected Save, reach the
desired caller group and press
Navi Roller.
See also “Copying via IR” on page
52 and “Transmitting data” on
page 78.
Removing a name and number
from a caller group
1 Press Names, roll to Caller
groups and press Navi Roller.
2 Roll to desired caller group and
press Navi Roller to select it.
3 Roll to Members and press Navi
Roller.
4 Roll to the name you want to
remove, press
Options
and roll to
Remove name and press OK.
Memory status
You can check what percentage of the
phone’s internal memory is unoccupied
and how many name and number
entries can still be stored in the SIM
card’s memory.
1 Press Names, roll to Options and
press Navi Roller.
2 Roll to Memory status and press
Navi Roller.
The phone now displays the status of
the SIM card memory. To view the
status of the phone’s internal memory,
roll down with Navi Roller.