52
2 Roll to the desired copying direction
(From phone to SIM card or
From SIM card to Phone) and
press Navi Roller.
3 Roll to One by one or All or
Default numbers and press
Navi Roller.
If you selected One by one, roll to
the name you want to copy and
press Copy.
Note:
When you copy From
SIM card to Phone, the
text Default numbers is not
shown.
4
Then select whether you want to
keep the original names and
numbers.
Note: Please note that the
Nokia 7110 supports the
storage of Chinese characters
in the phone memory.
Storage of Chinese
characters in the SIM Card
memory is not supported.
5 If you selected All or Default
numbers, press OK at Start
copying.
Sending and receiving
names and phone
numbers
You can send or receive a person’s
contact information as a business card
either via IR or as an Over The Air (OTA)
message if supported by the network.
To send a business card as an OTA
message, find the desired name and
number from the phone book and then
use the option Send card.
To send a business card via IR, use the
option Send card via IR. See also
“Copying via IR” on page 52 and “Trans-
mitting data” on page 78.
When you receive a business card, press
Show. Then press Options, select
Save or Discard, and press OK.
Note: Chinese business cards
can not be sent via IR.
Copying via IR
Copying a name and number
Using your phone’s infrared (IR) port,
you can send names and phone
numbers as business cards to a
compatible phone or PC which is
running an appropriate application.
When sending business cards to
another phone, make sure that the
other phone is set to receive data via its
IR port.
To Next Page
Loading...
