Configuring the System
68
7210 SAS-D CHASSIS INSTALLATION GUIDE
3HE 10087 AAAA TQZZA Edition 01 Issue: 08
5.3.2.1 Running Telnet
After the IP parameters are configured, you can access the 7210 SAS-D CLI with a
Telnet connection. To establish a Telnet connection, run a Telnet program and issue
the Telnet command, followed by the IP address.
The following displays an example of a Telnet login:
C:\>telnet 10.10.10.25
Login: admin
Password: <enter password for user admin>
ALU-1#
To Next Page
Loading...
