7210 SAS-D CHASSIS INSTALLATION GUIDE Preface
Issue: 08 3HE 10087 AAAA TQZZA Edition 01 9
1 Preface
1.1 About This Manual
This guide provides site preparation recommendations, step-by-step procedures to
rack mount the Nokia 7210 SAS-D, and instructions to install and configure the
system software.
Each 7210 SAS-D switch is shipped with a power cord (AC or DC) and rubber feet.
Optionally, a rack-mounting bracket kit, a wall-mounting bracket kit, and external AC
or DC power module and bracket kit (ETR-only) are available for order.
1.1.1 Warnings and Notes
Observe the warnings and notes provided in each chapter to avoid injury or
equipment damage during installation and maintenance. Follow the safety
procedures and guidelines when working with and near electrical equipment.
1.1.2 Audience
This guide is intended for network installers and system administrators who are
responsible for installing, configuring, or maintaining networks. This guide assumes
that you are familiar with electronic and networking technologies.
To Next Page
Loading...
