AT Command Set for Nokia 8210 11
Copyright © 2000. Nokia Mobile Phones. All rights reserved.
+CBST Select Bearer Service Type
Set command selects the bearer service <name> with data rate <speed>, and the
connection element <ce> to be used when data calls are originated (GSM 02.02).
Values may also be used during mobile terminated data call setup, especially in case
of single numbering scheme calls (see the command +CSNS, page 38). Test
command returns values supported by the TA as compound values. (GSM 07.07
section 6.7.)
Syntax:
AT+CBST=<speed>, <name>, <ce>
Select bearer service type. The default
option is 0, 0, 1.
AT+CBST?
Query current setting.
Response is +CBST: <speed>, <name>,
<ce>
AT+CBST=?
Show supported values.
Response is +CBST: (list of supported
<speed>'s), (list of supported <name>'s),
(list of supported <ce>'s)
Parameters:
<speed>:
0
autobauding (automatic selection of the
speed; this setting is possible in case of
3.1 kHz modem and non-transparent
service)
1
300 bps (V.21)
2
1200 bps (V.22)
3
1200/75 bps (V.23)
4
2400 bps (V.22bis)
5
2400 bps (V.26ter)
6
4800 bps (V.32)
7
9600 bps (V.32)
12
9600 bps (V.34)
14
14400 bps (V.34)
15
19200 bps (V.34)
16
28800 bps (V.34)
34
1200 bps (V.120)
36
2400 bps (V.120)
38
4800 bps (V.120)
39
9600 bps (V.120)
43
14400 bps (V.120)
47
19200 bps (V.120)
48
28800 bps (V.120)
49
38400 bps (V.120)
50
48000 bps (V.120)
51
56000 bps (V.120)
65
300 bps (V.110)
66
1200 bps (V.110)
68
2400 bps (V.110 or X.31 flag stuffing)
70
4800 bps (V.110 or X.31 flag stuffing)
71
9600 bps (V.110 or X.31 flag stuffing)
75
14400 bps (V.110 or X.31 flag stuffing)
79
19200 bps (V.110 or X.31 flag stuffing)
80
28800 bps (V.110 or X.31 flag stuffing)
81
38400 bps (V.110 or X.31 flag stuffing)
82
48000 bps (V.110 or X.31 flag stuffing)
83
56000 bps (V.110 or X.31 flag stuffing)
115
56000 bps (bit transparent)
116
64000 bps (bit transparent)
also all other values below 128 are
reserved
To Next Page
Loading...
Need help?
General
