Nokia 8210 - List of Menu Functions

AT Command Set for Nokia 8210 35
Copyright © 2000. Nokia Mobile Phones. All rights reserved.
First <profile> location is 1. Values restored shall be those that are available in SIM
database (GSM 11.11). If any of protocol id, data coding scheme or validity period is
returned from SIM/ME, +CSMP parameter <fo> is forced to be SMS-SUBMIT (i.e.
bits 1-0 are set to '01'). In addition, if validity period is returned, <fo> is forced to
indicate relative validity period format (i.e. bits 4-3 are set to '10'). Rest of the <fo>
bits are set to zero.
Syntax:
AT+CRES=<profile>
Restore settings.
AT+CRES=?
Display the supported profile numbers for
reading and writing of settings.
Response is +CRES: (list of supported
<profile>'s).
Values for <profile>:
0...255 manufacturer specific profile number from where settings are to be
restored
+CRLP Radio Link Protocol
This command selects the Radio Link Protocol parameters. (GSM 07.07 section 6.8.)
Syntax:
AT+CRLP=<iws>,<mws>,<T1>, <N2>
[,<ver>, <T4>]
Set RLP parameters.
AT+CRLP?
Query current setting.
Response is +CRLP: <iws>, <mws>,
<T1>, <N2> [<CR> <LF> +CRLP: <iws>,
<mws>, <T1>, <N2>, 2, <T4>]
AT+CRLP=?
Show valid values.
Response is +CRLP: (list of supported
<iws>'s), (list of supported <mws>'s), (list
of supported <T1>'s), (list of supported
<N2>'s) [<CR> <LF> +CRLP: (list of
supported <iws>'s), (list of supported
<mws>'s), (list of supported <T1>'s), (list
of supported <N2>'s), 2, (list of supported
<T4>'s)] .
Parameters:
<iws>
IWF to MS window size
<mws>
MS to IWF window size
<T1>
acknowledgement timer T1
<N2>
retransmission attempts N2
<ver>, <verx>:
RLP version number in integer format;
when version indication is not present it
shall equal 0.
NOTE: Versions 0 and 1 share the same
parameter set. Read and test commands
shall return only one line for this set
(where <verx> is not present).
<T4>:
re-sequencing period T4
+CSAS Save Settings
This command saves active message service settings to a non-volatile memory. A
TA can contain several profiles of settings. All settings specified in commands
Service Centre Address +CSCA and Set Message Parameters +CSMP are saved.
(GSM 07.05 section 3.3.5.)